How to Remove Calcium Deposits from Faucet at Home!

Tap water can make your faucet look cloudy and scummy. Household water comes with various types of minerals. This is the main reason for deposit buildups such as calcium and magnesium.

With evaporating water, the minerals can leave marks behind on your kitchen sink faucet and similar areas. These marks will later form into scaly, hard deposits. Solutions are pretty much within the reach and inside your kitchen.

There are some eco-friendly kitchen faucet cleaning agents that are great at removing calcium deposits or limescale. Let’s know an easy way to bring your faucet back to shining.

how to remove calcium deposits from faucet
Image Source: mrrooter.com

Faucet Clean-Up Method!

Here is a step-by-step instruction guide that can help you to clean such calcium deposit from the faucet. Keep on Reading!

Choose Your Fighter!

Want me to name one thing that’s going to be your BFF for fighting mineral deposits? It’s acidic liquids undoubtedly. Acids are known to be finest for eating away calcium deposits. It’s also usable for other mineral build-ups on a faucet and even showerhead.

There are some acidic household items and cleaners that can help you easily get rid of mineral deposits. A few are:

  • White vinegar
  • Lemon juice
  • CLR cleaner
  • Sulfuric acid
  • Phosphoric acid cleaners
  • Muriatic acid (If the deposits are too tough then use this mixture.

Get Materials Needed

Before you start, get a few materials for the process.

  • Rubber band
  • Towel/rag
  • Pliers
  • Protective eyewear
  • Sponge/toothbrush
  • Plastic bag

Take off that Faucet Aerator

There are various DIY sites that will tell you to try the plastic-bag-over-faucet method. This is mostly used for getting rid of mineral deposits. However, this method is known to be applicable for only external buildup removal.

So, if you want to really get that cleaned results inside your faucet, removing it is the suggestion we want to give. Make sure you get rid of the faucet aerator form base and clean it separately.

The aerator sits in the faucet head’s tip. To get rid of it, grab aerator by standing over the faucet. You can use a pair of plier for this step. Now use a counterclockwise motion for twisting screws. Do so until the aerator completely comes off.

You should be careful to tack the gaskets. Make sure all components are reattached in the right order later.

Soaking Components

It’s time to put on your eyewear for protection. Do this right after removing the aerator. Now the cleaner you chose will be used. Simply pour it enough into a bowl. Gradually place all components that you detached into the bowl with cleaner.

If you are using a strong acid, diluting is important. Make sure you follow the right instructions to do so. This will have an impact on how long you should soak the components inside.

There is still some component that needs to be cleaned. You won’t be able to place a few into the cleaner bowl. For them, use a simple plastic bag. Pour the cleaner into a bag. You should do the same dilution and follow timing rules. Now use a rubber band and wrap the plastic bag putting fixtures inside.

You should not use too strong acids on a few surfaces. For example, phosphoric or sulfuric acid. Muriatic acid is also in the list. Make sure you have read the instructions well.

See if there is any mineral build up in the base of your faucet. Use a rag or old towel. Soak it into vinegar. Now use the cloth to wrap around that area. Let it stay like that for around one or two hours.

Once the time period is over, simply scrub off any remaining.

Rinsing Off the Acid

Your aerator should be done with the soaking method. You need a soft cloth for the next step. Simply use it to scrub the surface. You can also try a toothbrush or sponge. Make sure you get rid of any mineral deposits remaining.

Don’t be less serious about this step. Acid should not be remaining at any cost. This element can eat way your metal if they are left for longer period.

Reassembly Everything Back to Normal

The aerator should be clean completely. It’s time to reconnect it back to the faucet. Make sure you get it in the right order while fixing. You are Done!

Prevention Is the Best Way!

Are you living in Bradenton, Tampa or maybe Sarasota? Then let me tell you bad news! This isn’t going to be the last time for scrubbing away such minerals. It’s probably going to happen frequently.

So, you definitely need some long-term solutions. One example is a water softening system. This technology can help you to soften the home water you use. It involves removing damaging and hard minerals from your water line. It can get rid of calcium quite efficiently.

Verdict

So, that was a quick way to get rid of such irritating stains. Calcium deposits are seriously ugly and guests will probably have a wrong idea about your hygiene morals.

You surely need to be quick taking right steps for such spots. Either it is trying a regular clean up routine like the one above or simply getting a long-term solution. Good Luck!

LEAVE A REPLY

Please enter your comment!
Please enter your name here